Spartan Hydraulic Ironworker Specifications. Marvel Hydraulic Ironworkers

ISO 9001: 2000 Certified

MARVEL MANUFACTURING COMPANY, INC.

3501 Marvel Drive

Oshkosh, WI 54902 Official marvel band saw Website

Phone (920) 236-7200

Fax (920) 236-7209

Welcome to the official Marvel® Mfg. Co., Inc. Website. Home of the Marvel Metal Cutting Bandsaw and the official Marvel Band Saw Part source for the Industrial Vertical Band Saw and the Horizontal Band Saw.

Marvel 8 Mark III

60˚ Tilt Both Ways

3˚ And Straight Column in one machine
Patent pending Easy Load Guide Blocks
Optional Power Tilt

Click Here for more details.

Marvel TouchTech60 Saws now with servo driven shuttle. Available in 4 , 8 , 13 & 18 Foot shuttle Lengths.

Click Below for Details.

New Metal Bandsaw

SEE OUR NEW UPDATED SPARTAN HYDRAULIC IRONWORKER PAGES

Click here for Spartan Hydraulic Ironworker Specifications. Hydraulic Ironworkers

Welcome to the Official Spartan Hydraulic Ironworker Web Page. Marvel Mfg. offers a complete line of Hydraulic Ironworkers. Spartan Hydraulic Ironworkers in Single Cylinder Hydraulic Ironworker & Two Cylinder Hydraulic Ironworker. Vee notch Iron Worker, Angle notch Iron Worker, Pipe notch, punch & shear, Angle bending, etc. _{_{_9-/26/07}}

Spartan Hydraulic Ironworker Products Spartan® Hydraulic Ironworkers

SPARTAN IRONWORKER SPECIFICATIONS

Capacities & Specifications Rated on 65,000 PSI Tensile

	IW66D	IW88D	IW110D/2	IW135D	IW180DX
Work Stations	5	5	5	5	5
Punching
Punching Pressure	66 tons	88 tons	110 tons	135 tons	180 tons
Standard Tooling*	1-1/2" in 3/8"	1-1/2" in 9/16"	1-1/2" in 11/16"	1-1/2" in 7/8"	1-1/2" in 1-3/16"
Large Tooling**	2" in 5/16"	2" in 1/2"	2" in 3/8"	2" in 1/2"	2" in 7/8"
Oversize Tooling**	6" in 3/32"	6" in 1/8"	8"in 1/8"	8"in 5/32"	8" in 7/32"
Throat Depth	12"	12"	12"	12"
DX Series	20"	20"	20"	20"	20"
Channel Flange Max.	7"	7"	7"	7"	7"
Stroke Length	4"	4"	4"	4"	4"
Cycle/Min. (3/4")	30	29	24	28	29
Work Height	41-1/4"	41-1/4"	41-1/4"	41-1/4"	41-1/4"
Flat Bar Shearing
Flat Bar Shear	14" in 9/16"	17" in 5/8"	24" in 5/8"	24" in 11/16	30" in 3/4"
Width and Thickness	10" in 3/4"	12" in 3/4"	14" in 1"	16" in 1"	16" in 1-1/8"
Blade Length	14-1/8"	18"	24-3/8"	24-3/8"	30-1/4"
Angle Flange Trim	4"	4"	4"	4"	4"
Work Height	36"	36-1/2"	38"	36"	36"
Angle Shear
90 Degrees	5" x 5" in 1/2"	6" x 6" in 1/2"	6" x 6" in 1/2"	6" x 6" 11/16"	8" x 8" in 3/4"
45 Degrees	2-1/2"x2-1/2" in 5/16"	3-1/8"x3-1/8"in 3/8"	3-1/8"x3-1/8"in 3/8"	3-1/8"x3-1/8"in 3/8"	3-1/8"x3-1/8"in 3/8"
Work Height	43-3/4"	45-3/4"	48-1/4"	46-1/2"	46-1/2"
Bar Shearing
Round Bar	1-1/2"	1-3/4"	1-3/4"	2"	2-1/4"
Square Bar	1-1/2" x 1-1/2"	1-3/4" x 1-3/4"	1-3/4" x 1-3/4"	2" x 2"	2-1/4" x 2-1/4"
Channel Shear**	5"*	6"*	6"*	7"*	8"*
I Beams***	5"*	6"*	6"*	7"*	8"*
Work Height	48"	50"	52-3/4"	51-1/2"	54"
Notching
Rectangular Notcher	2" x 3-1/2" in 3/8"	2" x 3-1/2" in 1/2"	2" x 3-1/2" in 1/2"	2" x 3-1/2" in 1/2"	2" x 3-1/2" in 5/8"
V-Notcher@Notcher Station ***	3-1/2" x 3-1/2" in 3/8"*	3-1/2" x 3-1/2" in 1/2"*	3" x 3" in 1/2"	4" x 4" in 1/2"	4" x 4" in 5/8"
V-Notcher@Punch Station ***	5-3/4" x 5-3/4" in 5/16"*	5-3/4" x 5-3/4" in 3/8"*	4" x 4" in 1/2"	5-3/4 x 5-3/4" in 1/2"*	5-3/4" x 5-3/4" in 1/2"*
Work Height	35-3/4"	36-1/2"	36"	36-1/4"	36-1/4"

Special Tooling
Single Vee Press Brake ****	10" x 9/16"	10" x 9/16"*	10" x 3/4"	10" x 3/4"	10" x 3/4"
Multi Vee Press Brake	20" x 3/16"	20" x 3/16"	27-1/2" x 3/16"	27-1/2" x 3/16"	27-1/2" x 3/16"
Pipe Notcher	4" Max *	4" Max *	4" Max *	4" Max *	4" Max *
Angle Bending	4" x 1/4" *	4" x 5/16" *	4" x 1/2" *	4" x 1/2" *	4" x 1/2" *
Drive Motor	7.5HP	10HP	10HP	15HP	20HP
Net. Wt. D.	3,969 lbs.	4,807 lbs.	6,505 lbs	7,365 lbs.
DX:	4,851 lbs.	5,844 lbs	7,608 lbs.	8,710 lbs.	10,915 lbs.
Machine Dimensions D:	68" x 31" x 67"	73" x 33" x 68"	83" x 33" x 71"	86" x 35" x 73"
DX:	82" x 31" x 67"	88" x 33" x 68"	97" x 33" x 68"	98" x 35" x 73"	107" x 35" x 79"

* Requires punches & dies (not included) with oversize coupling nut.

** Contact your District Sales Mgr. or Marvel Manufacturing, Inc for further information.

*** With special tooling only.

OPTIONAL TOOLING: CHANNEL SHEAR, VEE NOTCHER, PRESS BRAKE, PIPE NOTCHER, PIPE PUNCHER, LARGE HOLE DIE HOLDER, ROLLER SUPPORT STAND.

[Home] [Up]

Questions or comments please see our contact page.

Note: Options, specifications, prices and webpage content subject to change without notice.

Warning: Machine guarding removed for illustration proposes only. Always read the operation manual for proper machine operation.

This site is best viewed with Internet Explorer 6.x and a screen resolution of 1024x768