ISO 9001: 2000 Certified

Official Marvel Mfg. Website for Band Saw & Band Saw PartMARVEL MANUFACTURING COMPANY, INC. 

3501 Marvel Drive 

Oshkosh, WI  54902                                                     Official   marvel  band  saw   Website 

Phone (920) 236-7200 

Fax (920) 236-7209 

 

Welcome to the official Marvel®  Mfg. Co., Inc. Website.  Home of the Marvel Metal Cutting Bandsaw and the official Marvel Band Saw Part source for the Industrial Vertical Band Saw and the Horizontal Band Saw.

Official Marvel Mfg. Website for Band Saw & Band Saw Part MK III

 Marvel 8 Mark III

60˚ Tilt Both Ways

  • 3˚ And Straight Column in one machine

  • Patent pending Easy Load Guide Blocks

  • Optional Power Tilt

Marvel Band Saw Bandsaw Vertical Band Saw

Click Here for more details.

Marvel TouchTech60 Saws now with servo driven shuttle. Available in 4 , 8 , 13 & 18 Foot shuttle Lengths.

Click Below for Details.

Marvel Band Saw Bandsaw TouchTech Band Saw

New Metal Bandsaw

Cutting Chart - Blade Chart

Speed & Cutting Rate Guide
Material Width (in.) 2" 4" 6" 8" 10" 12" 16" 20"
Tooth Pitch
Aluminum Alloys
Blade Speed (FPM) 300 300 300 300 300 300 300 300
Cutting Rate (in˛/min.) 12-14 12-14 12-14 12-14 12-14 12-14 12-14 12-14
Copper Alloys
Blade Speed (FPM) 225 210 200 185 176 164 150 130
Cutting Rate (in˛/min.) 8-9 7-8 7-8 6-7 6-7 5-6 4-5 4-5
Free Machining Steel
Blade Speed (FPM) 345 325 310 290 275 255 230 210
Cutting Rate (in˛/min.) 11-13 11-13 11-12 9-10 9-10 9-10 8-9 7-8
Low Carbon Steel
Blade Speed (FPM) 290 270 255 240 228 210 195 172
Cutting Rate (in˛/min.) 10-12 9-10 9-10 8-9 8-9 7-8 6-7 5-7
Med. Carbon Steel
Blade Speed (FPM) 250 235 225 215 196 185 165 150
Cutting Rate (in˛/min.) 8-9 8-9 7-8 7-8 6-7 6-7 5-6 4-5
High Carbon Steel
Blade Speed (FPM) 210 195 185 175 165 150 138 125
Cutting Rate (in˛/min.) 7-8 6-7 6-7 6-7 5-6 5-6 4-5 4-5
Nickel Chrome Moly Steel
Blade Speed (FPM) 200 185 175 165 155 145 130 120
Cutting Rate (in˛/min.) 6-7 6-7 6-7 5-6 5-6 4-5 4-5 3-4
Chrome Moly Steel
Blade Speed (FPM) 215 205 200 190 170 158 145 125
Cutting Rate (in˛/min.) 7-8 7-8 6-7 6-7 5-6 5-6 4-5 4-5
High Speed Tool Steel
Blade Speed (FPM) 100 95 90 85 80 75 65 60
Cutting Rate (in˛/min.) 3-4 2-3 2-3 2-3 2-3 1-2 1-2 1-2
Stainless Steels
Blade Speed (FPM) 95 90 85 70 75 70 65 58
Cutting Rate (in˛/min.) 2-3 2-3 2-3 2-3 2-3 1-2 1-2 1-2
Nickel Base Alloys
Blade Speed (FPM) 65 60 57 52 50 50 50 50
Cutting Rate (in˛/min.) 2-3 2-3 2-3 1-2 1-2 1-2 1-2 1-2
Cast Iron
Blade Speed (FPM) 123 115 110 103 97 90 82 75
Cutting Rate (in˛/min.) 3-4 3-4 3-4 3-4 2-3 2-3 2-3 1-2
Structural Steel
Blade Speed (FPM) 270 250 240 225 210 195 175 160
Cutting Rate (in˛/min.) 9-10 9-10 8-9 8-9 7-8 6-7 6-7 5-6
Note: Blade Speeds and Cutting Rates listed here are averages for each Material Group. 
        To obtain information on specific grades call or e-mail Marvel Mfg. or contact your blade supplier.

Marvel Mfg. Co., Inc. offers a Vertical Bandsaw, a Horizontal Band Saw and a 60˚ tilt Vertical Band Saw, plus the entire Spartan Metal Band Saw line including; the Spartan Metal Cutting Bandsaw, the Spartan Plate Saw, Ironworker and the Carbide Tip Circular Saw.  The Marvel Bandsaw has been manufactured in the United States for 100 years providing the best Industrial Bandsaw maintaining high quality with each Bandsaw Part produced.  Let us supply your Bandsaw Part and Lenox Bandsaw Blade.  

Hit Counter 4/26/07

 

 Site Search

powered by Google


WWW Sawing.com

Questions or comments please see our contact page.

No part or parts of this site may reproduced on any other sites without written permission of Marvel® Manufacturing, Inc.
Copyright © 2006 Marvel Manufacturing Inc. All rights reserved.

Note: Options, specifications, prices and webpage content subject to change without notice.

Warning: Machine guarding removed for illustration proposes only. Always read the operation manual for proper machine operation.

This site is best viewed with Internet Explorer 6.x and a screen resolution of 1024x768