ISO 9001: 2000 Certified

Official Marvel Mfg. Website for Band Saw & Band Saw PartMARVEL MANUFACTURING COMPANY, INC. 

3501 Marvel Drive 

Oshkosh, WI  54902                                                     Official   marvel  band  saw   Website 

Phone (920) 236-7200 

Fax (920) 236-7209 

 

Welcome to the official Marvel®  Mfg. Co., Inc. Website.  Home of the Marvel Metal Cutting Bandsaw and the official Marvel Band Saw Part source for the Industrial Vertical Band Saw and the Horizontal Band Saw.

Home
Up

Official Marvel Mfg. Website for Band Saw & Band Saw Part MK III

 Marvel 8 Mark III

60˚ Tilt Both Ways

  • 3˚ And Straight Column in one machine

  • Patent pending Easy Load Guide Blocks

  • Optional Power Tilt

Marvel Band Saw Bandsaw Vertical Band Saw

Click Here for more details.

Marvel TouchTech60 Saws now with servo driven shuttle. Available in 4 , 8 , 13 & 18 Foot shuttle Lengths.

Click Below for Details.

Marvel Band Saw Bandsaw TouchTech Band Saw

New Metal Bandsaw

INTRODUCING THE NEW MARVEL

 

 

 

 

 

 

New Features

  •  5HP Sensorless Vector blade drive 50-450 fpm.

  • Power rapid advance & rapid column return.

  • Automatic saw column retract.

  • Open lower bandwheel design for better chip control.

  • 60 degree tilting in both directions.

  • Optional Power tilt.

  • Blade stall/brake detection.

  • New improved blade tension

  • 1.25" blade

  • Patent pending Quick Change Column.

  • Patent pending Easy Load Guide Blocks.

  • 24VDC Controls.

Marvel patent pending Quick Change Column.

Changes from strait to 3˚forward cant.

TAKES ONLY 30 MINUTES TO CHANGE.

New Marvel Patent pending Easy Load Guide Blocks.

State of the art controls.

  •  All Siemens IEC contactors and control relays.

  •  ABB IEC Fused Disconnect Switch, NFPA79 compliant.

  •  State of the Art Siemens S7 PLC.

  •  All 24 Volt DC Control.

  •  Allen Bradley Push Buttons.

  •  High Quality Sensorless Vector Drive.

  •  UL 508a Listed Electrical Panel.

Up front electrical box and push buttons for easy service.

Specifications

Capacity @ 90˚ 18" (457 mm) Horizontal, 22" (558 mm) Vertical
Capacity @ 45˚Right 18" (457 mm) Horizontal, 14.5" (368 mm) Vertical
Capacity @ 45˚Left 18" (457 mm) Horizontal, 13" (330 mm) Vertical
Capacity @ 60˚ Right 18" (457 mm) Horizontal, 9.7" (246 mm) Vertical
Capacity @ 60˚ Left 18" (457 mm) Horizontal, 7.3" (185 mm) Vertical
Capacity with 3˚Cant 17.5" (445 mm) Horizontal, 22" (558 mm) Vertical
Blade Speed 50-450 fpm (15-137 m/min) infinitely variable
Feed Range 0-250 lbs. (64 kgf)
T-Slotted Work Table Work area 24.25" x 33" (616 mm x 838mm)
Table Height 34.5" (876 mm)
Bandwheel Diameter 19" (482 mm), cast iron wheels
Coolant System 21 gallons (79 liters)
Blade 15' 4" (4674 mm) long x 1.25" (32 mm) wide, .042" (1.07 mm) thick
Coolant Pump 1/8 Hp
Blade Drive Motor 5 HP (3.75 kw) 1800 RPM

No part of this page may be copied or duplicated without the written permission of Marvel Manufacturing Co. Inc.

Copyright©2006, Marvel Manufacturing Co. Inc., All rights reserved.

All specifications are subject to change without notice.

[Home] [Up] 

 Site Search

powered by Google


WWW Sawing.com

Questions or comments please see our contact page.

No part or parts of this site may reproduced on any other sites without written permission of Marvel® Manufacturing, Inc.
Copyright © 2006 Marvel Manufacturing Inc. All rights reserved.

Note: Options, specifications, prices and webpage content subject to change without notice.

Warning: Machine guarding removed for illustration proposes only. Always read the operation manual for proper machine operation.

This site is best viewed with Internet Explorer 6.x and a screen resolution of 1024x768